InfinityQS now offers wireless gauging hardware to help you send data quickly and efficiently to the ProFicient SPC application. Our wireless gauging products are designed specifically for industrial and manufacturing environments and work with a wide variety of gages.
For frequently asked questions about the wireless gauging hardware, please click here.
InfinityQS MobileCollect Wireless System
The InfinityQS MobileCollect Wireless System allows you to choose from several transmitter and base options to fit your gaging and measurement collection requirements. MobileCollect supports a broad range of digital & RS-232 gages including handheld gages from manufacturers such as Brown & Sharpe, CDI, Dillon, Flexbar, Federal Maxum, Fowler, LMI, Mahr Federal, Mitutoyo, Ono Sokki, Starrett, Sylvac, etc. MobileCollect supports our previous GageWay Wireless and allows you to mix MobileCollect and GageWay wireless in a wireless configuration.
A wireless measurement collection system can be configured as simply a base unit connected to a PC receiving wireless data from a transmitter, or can be as complex as multiple base units receiving data from dozens of transmitters. Using these transmitters and base units, this system can be configured as fixed-base or mobile-base.
Transmitters - Mobile ModulesMobile Modules and Remotes are transmitters that send the measurement data to a Base. A typical wireless system has multiple transmitters and bases. The Mobile Modules are battery powered and often use gages such as calipers, micrometers, etc. Remotes are powered by an external power source (i.e., AC adapter) and are typically used to transfer measurement data from gage interfaces, scales, etc. |
||
|
The Digital Mobile Module is used to capture measurements from most digital and RS-232 handheld gages such as calipers, micrometers, digital indicators, etc. |
The Command Mobile Modulefunctions the same as the Digital Mobile Module, with the additional ability to send a command from a base unit to initiate a gage reading. |
The RS-232 Mobile Module supports RS-232 gages not supported by the Digital Mobile Module or the Command Mobile Module. |
 |
 |
 |
|
Key Features:
|
Key Features:
|
Key Features:
|
Receivers - Base UnitsThe bases receive measurements from transmitters (Mobile Modules and Remotes). The bases are connected to a PC or laptop by a USB or RS-232 port. All data sent to USB ports appear as standard RS-232 data to your application. |
||
|
The USB Base receives measurements from Mobile Modules and Remotes. Connects directly to a USB port on a PC or a laptop. It is powered by the USB port and does not need a separate AC adapter. |
The RS-232 Base receives measurements from Mobile Modules and Remotes. Connects to an RS-232 port on the PC and is powered by a separate AC adapter. |
|
 |
 |
|
|
Key Features:
|
Key Features:
|
|
